Vintage Baseball Girl “Hit The Dang Ball” DTF Heat Transfer
Step up to the plate with this adorable vintage-inspired design featuring a determined little slugger ready to knock it out of the park! This charming DTF transfer captures the spirit of America’s favorite pastime with a sassy twist.
The Story Behind the Design:
Meet little Rosie “Slugger” McGillicuddy, the star of the 1940s Rockford Peaches junior league! Legend has it that when the neighborhood boys told her girls couldn’t play baseball, she marched right onto that diamond, grabbed her trusty wooden bat, and declared “All the dang ball is getting hit today!” And hit she did – right over the fence and straight into baseball history!
Product Features:
โจ Ready-to-press DTF (Direct to Film) heat transfer
โจ Vintage-style distressed finish with authentic worn look
โจ Vibrant red and cream color scheme with decorative star accents
โจ High-quality print with excellent detail and clarity
โจ Durable transfer material for long-lasting wear
โจ Easy application – just heat press and go!
Perfect For:
โข Baseball and softball enthusiasts
โข Vintage sports fans
โข Anyone who loves retro Americana style
โข Girls who break barriers and swing for the fences
โข Sports-themed apparel and accessories
Transform any plain garment into a conversation starter with this delightfully spirited design that celebrates both baseball heritage and girl power!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275ยฐ F โ 285ยฐ F
-Polyester, Lycra, Spandex, etc.:
275ยฐ F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy โ Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press โ
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press โ
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-ย
-The DTF adhesive does not full bond as well with canvas material because it has โlooserโ open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Hit the Dang Ball – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.