After While Crocodile DTF Transfer – Retro Green Gator with Checkered Flag Background
Meet Charlie the Crocodile, the smoothest reptile in the swamp! This charming green gator became famous for his laid-back attitude and signature catchphrase “After While” whenever anyone said goodbye. Legend has it that Charlie was once a race car driver who got a little too relaxed at the finish line, but his cool demeanor made him an instant fan favorite.
Product Features:
• Ready-to-Press DTF Transfer – No weeding required, just peel and press
• Vibrant Green Crocodile Design with playful “After While” script lettering
• Retro Checkered Pattern Background in classic blue and white
• High-Quality Heat Transfer Material for professional results
• Easy Application – Perfect for t-shirts, hoodies, tote bags, and more
What You’ll Receive:
Your DTF transfer arrives ready to heat press at your selected size. Simply position, press with heat, and peel away the carrier sheet to reveal this adorable alligator design that’s sure to make everyone smile.
Perfect For:
– Vintage-style apparel
– Kids’ clothing and accessories
– Retro-themed projects
– Anyone who loves a good crocodile pun
– Gifts for reptile enthusiasts
Transform any plain garment into a conversation starter with Charlie’s infectious good vibes and timeless “see you later” charm!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “After A While Crocodile Green – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.