We will be open Friday, July 3rd. We will be closed Saturday July 4th - Monday July 6th. We will reopen on Tuesday, July 7th for normal business hours. Dismiss
Transform any garment into a festive fiesta with this vibrant “Let’s Fiesta” DTF heat transfer! This eye-catching design features a traditional Mexican sombrero and acoustic guitar in bold red ink against cheerful yellow and white stripes, creating the perfect party-ready look.
The Story Behind the Design:
Meet Carlos, a guitar-playing sombrero who spent years dreaming of throwing the ultimate backyard fiesta. One sunny afternoon, he finally gathered the courage to invite the whole neighborhood over for tacos, music, and dancing under the stars. His infectious enthusiasm and catchy phrase “Let’s Fiesta!” became legendary, and now you can bring that same party spirit wherever you go!
Product Features:
โข Ready-to-press DTF (Direct to Film) heat transfer
โข Vibrant red lettering with decorative Mexican elements
โข High-quality, durable transfer material
โข Easy application with heat press or household iron
โข Perfect for t-shirts, hoodies, tote bags, and more
โข Festive striped background adds extra visual appeal
Perfect For:
– Cinco de Mayo celebrations
– Mexican restaurant staff uniforms
– Party and festival outfits
– Cultural appreciation events
– Fun casual wear
– Gift giving to party lovers
Bring Carlos’s party spirit to your wardrobe and let everyone know you’re always ready to celebrate! This transfer applies easily and creates a professional, long-lasting design that’s sure to get the party started.
Temperature-
-Cotton, Cotton Blends, & Canvas:
275ยฐ F โ 285ยฐ F
-Polyester, Lycra, Spandex, etc.:
275ยฐ F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy โ Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press โ
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press โ
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-ย
-The DTF adhesive does not full bond as well with canvas material because it has โlooserโ open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Lets Fiesta Sombrero Guitar – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.