I Asked Myself If I’m Okay And We Both Started Laughing Skeleton Design
Meet Susie Skeleton – the queen of dark humor and self-reflection! This hilarious DTF transfer features a glamorous skull with flowing hair, heart-shaped sunglasses, and a beer mug, perfectly capturing those moments when you check in with yourself and realize you’re both a hot mess and totally fine with it.
The Susie Chronicles:
Picture this: Susie was having one of those days where everything felt like controlled chaos. So she did what any reasonable person would do – she looked in the mirror and asked herself, “Girl, are you okay?” What happened next? They both burst into uncontrollable laughter because honestly, when you’re a fabulous skeleton living your best afterlife with great hair and cold beer, “okay” is relative!
Product Features:
• Ready-to-Press DTF Transfer – No weeding or cutting required
• Vibrant Hot Pink Design – Eye-catching color that pops on any fabric
• Professional Quality – Crisp details from Susie’s flowing locks to her sparkly accessories
• Durable & Washable – Susie’s sass will last wash after wash
• Easy Application – Just heat press and go
Perfect For:
Mental health awareness with humor, self-care enthusiasts, anyone who talks to themselves (and gets great advice), skeleton lovers, beer enthusiasts, or anyone who appreciates life’s beautifully chaotic moments.
Transform any garment into a conversation starter with Susie’s relatable wisdom. Because sometimes the best therapy is laughing with yourself about how wonderfully weird life can be!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Skeleton Self Talk Laughing – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.