Transform any garment into a sweet declaration of love with this adorable patchwork-style “BE MINE” DTF transfer! Each letter is beautifully crafted with a charming mix of red gingham checks, polka dots, floral patterns, and heart motifs that create an irresistible Valentine’s vibe.
The Story Behind the Design:
Legend has it that Cupid got tired of shooting arrows and decided to try his hand at quilting instead. After accidentally mixing up his arrow bag with his grandmother’s fabric scraps, he created this delightfully mismatched masterpiece. Now every piece tells a different love story – from the gingham that reminds you of picnic dates to the tiny roses that whisper sweet nothings!
What You’ll Receive:
Ready-to-press DTF transfer featuring patchwork-style letters spelling “BE MINE” with coordinating heart accents and decorative stars. Each section showcases different romantic patterns including gingham checks, polka dots, floral prints, and heart designs in classic Valentine’s colors of red, pink, and cream.
Perfect For:
• Valentine’s Day apparel and gifts
• Romantic date night outfits
• Galentine’s Day celebrations
• Anniversary presents
• Cute couple’s matching items
• Children’s Valentine’s clothing
Application Instructions:
Simply place transfer face-down on your garment, press with heat press or household iron, peel when cool, and watch love bloom on fabric! Works beautifully on cotton, cotton blends, and polyester materials.
Create heartwarming memories with this charming patchwork valentine design that’s sweeter than a box of chocolates!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Be Mine Valentine Patchwork – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.