Volleyball Mama Letter Design with Sports Elements
Meet Sarah, the ultimate volleyball mama who turned her minivan into a mobile cheering station! After attending 847 games (yes, she counted), countless tournaments, and enough team dinners to feed a small army, Sarah discovered her superpower wasn’t just her legendary orange slices โ it was her ability to spot a perfect spike from three courts away while simultaneously organizing car pools via group text.
This vibrant DTF transfer captures the essence of every volleyball mama’s journey. The bold “MAMA” lettering features a playful mix of patterns including classic volleyball stripes, leopard print (because mama’s got style), and polka dots that represent all those late-night laundry sessions washing practice gear.
Design Features:
– Eye-catching “Volleyball” script in blue and yellow team colors
– Bold “MAMA” letters with unique sports-themed patterns
– Adorable volleyball-themed elements including shoes, trophy, whistle, and foam finger
– Distressed vintage styling for that authentic sports mom look
– Perfect blend of team spirit and mama pride
Product Details:
Ready to press DTF transfer that applies easily to cotton, polyester, and cotton blends. Simply position, press with heat press or household iron, and peel when cool. No weeding required โ just press and go, because volleyball mamas don’t have time for complicated crafts between games!
Whether you’re cheering from the bleachers, carpooling to tournaments, or organizing team snacks, this transfer lets everyone know you’re not just any spectator โ you’re a volleyball mama, and that’s a badge of honor earned through countless hours of love, support, and probably way too much coffee.
Temperature-
-Cotton, Cotton Blends, & Canvas:
275ยฐ F โ 285ยฐ F
-Polyester, Lycra, Spandex, etc.:
275ยฐ F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy โ Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press โ
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press โ
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-ย
-The DTF adhesive does not full bond as well with canvas material because it has โlooserโ open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Volleyball Mama – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.