Land of the Free Because of the Brave Patriotic DTF Heat Transfer
Transform your garments into a patriotic masterpiece with this stunning “Land of the Free Because of the Brave” DTF transfer! This eye-catching design celebrates American pride with a perfect blend of red, white, and blue elements that’ll make hearts swell with national spirit.
The Story Behind the Design:
Legend has it that this design was born when Lady Liberty herself decided to throw the most epic Fourth of July party in history! She gathered all her favorite American symbols – from checkered racing flags (because freedom should be fast!) to polka-dotted hearts (because love for country never goes out of style). Each letter tells a tale of courage, decorated with stars that once guided brave heroes home and stripes that wave proudly in the wind of freedom.
Design Features:
โข Bold “Land of the Free Because of the Brave” text in patriotic script
โข Mixed pattern letters featuring stars, stripes, checkerboard, and polka dots
โข Vibrant red, white, and blue color scheme
โข Decorative star accents surrounding the main design
โข High-quality DTF transfer ready to press
Perfect For:
– Memorial Day celebrations
– Fourth of July festivities
– Veterans Day tributes
– Military appreciation events
– Patriotic everyday wear
– American pride apparel
Ready-to-Press Convenience:
Simply heat press this professional DTF transfer onto your favorite shirt, hoodie, tote bag, or fabric item for an instant patriotic upgrade that honors those who serve!
Because looking fabulous while showing your American pride should always be this easy!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275ยฐ F โ 285ยฐ F
-Polyester, Lycra, Spandex, etc.:
275ยฐ F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy โ Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press โ
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press โ
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-ย
-The DTF adhesive does not full bond as well with canvas material because it has โlooserโ open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Land of the Free America – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.