Transform your little scholar’s wardrobe with this adorable “My Teacher Era” DTF heat transfer design! This playful and colorful design celebrates the magic of education with its vibrant, chunky letters decorated with cheerful smiley faces, twinkling stars, a classic red checkered apple, and a bright pink pencil.
The Story Behind the Design:
Once upon a time in a classroom far, far away, there lived the most enthusiastic teacher who believed that learning should be as colorful as a rainbow and twice as fun! She decorated her classroom with the brightest colors, filled it with giggles, and made sure every student felt like a shining star. This design captures that same joyful energy – because every great teacher knows that education is about painting the world with knowledge, one colorful lesson at a time!
Key Features:
✨ Ready-to-press DTF transfer – no weeding required
✨ Vibrant, fade-resistant colors
✨ Professional heat transfer quality
✨ Easy application instructions included
✨ Works on cotton, polyester, and cotton blends
What You’ll Receive:
Your DTF transfer will arrive ready to press at your selected size. Simply position, press with heat, and peel to reveal your stunning design! Each transfer includes detailed application instructions to ensure perfect results every time.
Celebrate your teaching journey or honor an amazing educator with this delightfully fun design that captures the heart and soul of what it means to be in your “Teacher Era”!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “In My Teacher Era – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.