Transform your wardrobe into a patriotic garden party with this adorable USA floral design! Our ready-to-press DTF transfer features the classic “USA” lettering filled with charming blue daisy patterns and topped with a sweet red gingham bow that screams summer picnic vibes.
The Story Behind the Design:
Legend has it that this design was born when Miss Liberty decided to host the ultimate Fourth of July garden party. She wanted something that said “I love America” but also “I have impeccable taste in floral arrangements.” After accidentally spilling her morning coffee on her favorite gingham tablecloth while arranging daisies, inspiration struck! The result? This perfectly imperfect blend of patriotic pride and cottage-core charm that makes everyone feel like they’re invited to the best backyard barbecue in the neighborhood.
Product Features:
• High-quality DTF (Direct to Film) transfer technology
• Vibrant blue floral pattern with crisp white daisies
• Adorable red gingham bow accent detail
• Professional-grade adhesion for long-lasting wear
• Easy application – just heat press and go!
• Perfect for shirts, bags, pillows, and more
Ideal For:
– Fourth of July celebrations
– Memorial Day gatherings
– Summer festivals and fairs
– Patriotic themed parties
– Anyone who loves Americana with a feminine twist
Ready to press onto your favorite items – this transfer brings together country charm and patriotic spirit in one delightfully designed package!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “USA Floral Gingham Bow – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.