Transform your wardrobe with this adorable “It’s Not Me It’s You” DTF transfer featuring a playful ransom note style design in Valentine’s Day colors of pink, red, and black. This sassy statement piece combines humor with style, perfect for those who love a little attitude with their fashion.
The Story Behind the Design:
Meet Sarah, the queen of witty comebacks and perfectly timed eye rolls. Tired of taking blame for everything from burnt toast to traffic jams, she decided to set the record straight once and for all. Armed with magazines, scissors, and a healthy dose of sass, she created the ultimate breakup letter that became an instant classic among her friend group. Now you can channel your inner Sarah with this cheeky design that says what we’re all thinking!
Product Features:
• Ready-to-press DTF transfer – no weeding required
• Vibrant pink, red, and black color scheme
• Ransom note letter styling with decorative hearts and stars
• High-quality heat transfer material for long-lasting wear
• Easy application with heat press or household iron
• Perfect for t-shirts, hoodies, tote bags, and more
Why You’ll Love It:
This transfer is ideal for anyone with a sense of humor who isn’t afraid to make a statement. Whether you’re going through a breakup, dealing with drama, or just want to add some personality to your outfit, this design delivers the perfect amount of sass with a smile.
Great for girls’ nights, anti-Valentine’s Day parties, or anytime you need to remind the world that sometimes… it really isn’t you!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “It’s Not Me It’s You – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.