Patriotic Popsicle Trio Fourth of July Summer Treats
Get ready to serve up some star-spangled sweetness with these adorable patriotic popsicles! This delightful DTF transfer features three festive frozen treats that are almost too cute to eat (but thankfully, you don’t have to!).
The Sweet Story Behind These Stars & Stripes Treats:
Legend has it that Uncle Sam himself invented these patriotic popsicles during a particularly hot Fourth of July celebration. When the ice cream truck ran out of red, white, and blue bomb pops, he grabbed some food coloring, a few wooden sticks, and his famous top hat for inspiration. The star-studded blue beauty was born from his patriotic dreams, the swirled red, white, and blue masterpiece came from his artistic soul, and the checkered charmer? Well, that’s what happens when you let Lady Liberty help in the kitchen!
Design Features:
✨ Three unique patriotic popsicle designs with gold glitter accents
✨ Vibrant red, white, and blue color scheme
✨ Charming wooden sticks with festive red ribbon bows
✨ Perfect for Fourth of July, Memorial Day, or summer celebrations
✨ High-quality DTF transfer ready to press
Perfect For:
• Fourth of July party shirts
• Summer festival apparel
• Patriotic kitchen decor
• Children’s clothing
• Memorial Day celebrations
• All-American themed crafts
Transform any garment into a sweet celebration of American pride with these irresistibly cute patriotic popsicles!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Patriotic Popsicle Trio – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.