USA Patriotic Floral Letters - DTF Transfer USA Patriotic Floral Letters - DTF Transfer Price range: $3.00 through $6.00
Vintage Americana Patchwork Heart - DTF Transfer Vintage Americana Patchwork Heart - DTF Transfer Price range: $3.00 through $6.00

Red White and Blessed – DTF Transfer

Price range: $3.00 through $6.00

Earn up to 6 points.
Red White and Blessed - DTF Transfer
Red White and Blessed – DTF Transfer
$3.00 – $6.00Price range: $3.00 through $6.00
DTF Transfer Sizing

All transfers are printed proportionally.

  • Horizontal transfers (wider than longer) will be max width (first number)
  • Vertical transfers (longer then wider) will be max length (second number)

Adult Sizing

Brand Transfer Size
Up to a 2″ x 2″ area

Pocket Transfer Size
Up to a 3″ x 3″ area

Hat Transfer Size
Up to a 3″ x 5″ area

Chest Transfer Size
Up to a 4″ x 4″ area

Adult XS-M Transfer Size
Up to a 10″ x 14″ area

Adult L-XL Transfer Size
Up to a 11″ x 14″ area

Adult 2XL+ Transfer Size
Up to a 12″ x 15″ area

Youth Sizing

Youth Chest Transfer Size
Up to a 2″ x 2″ area

YXS-YM Transfer Size
Up to a 3″ x 5″ area

YL-YXL Transfer Size
Up to a 4″ x 4″ area

Infant & Toddler Sizing

Infant Transfer Size
Up to a 2″ x 2″ area

Toddler Transfer Size
Up to a 3″ x 3″ area

Transform your wardrobe with this stunning patriotic floral design featuring the heartwarming message “Red White and Blessed” surrounded by beautiful red roses, white daisies, and festive fireworks in classic Americana colors.

The Story Behind the Design:
Legend has it this design was born during a backyard Fourth of July barbecue when Grandma Betty was arranging her prized garden roses in red, white, and blue mason jars. As fireworks lit up the evening sky, she gazed at her beautiful blooms and whispered, “We’re not just red, white, and blue – we’re red, white, and blessed!” Her granddaughter, an aspiring artist, overheard this sweet moment and knew she had to capture Grandma Betty’s wisdom in a design that would remind everyone to count their blessings while celebrating their patriotic spirit.

Product Features:
• Ready-to-press DTF (Direct to Film) heat transfer
• Vibrant, long-lasting colors that won’t fade or crack
• Professional-grade adhesion for multiple wash cycles
• Easy application with heat press or household iron
• Perfect for cotton, polyester, and cotton blends

Design Elements:
• Hand-lettered “Red White and Blessed” typography
• Elegant floral border with roses and daisies
• Patriotic firework bursts and decorative swirls
• Gold accent stars and heart details
• Classic red, white, and blue color palette

Perfect For:
Fourth of July celebrations, Memorial Day events, patriotic gatherings, summer festivals, or any time you want to showcase your American pride with a touch of floral elegance.

Application Instructions:
Press at 300°F for 10-15 seconds with medium pressure. Peel warm for best results.

Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F

-Polyester, Lycra, Spandex, etc.:
275° F

Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle

-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure

-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level

First Press –

  • -Position the shirt or fabric onto the heat press with nothing on it.
  • -Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
  • -Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
  • -Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.

Second Press –

  • -Crease the DTF transfer to find the midpoint down the length of the transfer.
  • -Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
  • -Make sure the white glue part is down on the shirt and the design is visible from above
  • -Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
  • -Remove the top film, starting from the corner and pull across (not up) until the film is completely removed

NOTE- 

  • -The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
  • -Fine lines have less glue due to their design and may not fully stick until cooled
  • -For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
  • -Once you have removed the film, place the shirt back on the heat press for the final press

Third Press-

  • -Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
  • -Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.

Reviews

There are no reviews yet.

Be the first to review “Red White and Blessed – DTF Transfer”

Your email address will not be published. Required fields are marked *

SKU: N/A Categories: , , , , Tag: Brand:

Related products