Dancing Rainbow Skeleton Trio - DTF Transfer Dancing Rainbow Skeleton Trio - DTF Transfer Price range: $3.00 through $6.00
Cute Halloween Doodles Gradient - DTF Transfer Cute Halloween Doodles Gradient - DTF Transfer Price range: $3.00 through $6.00

Skeleton Waiting for Halloween – DTF Transfer

Price range: $3.00 through $6.00

Earn up to 6 points.
Skeleton Waiting for Halloween - DTF Transfer
Skeleton Waiting for Halloween – DTF Transfer
$3.00 – $6.00Price range: $3.00 through $6.00
DTF Transfer Sizing

All transfers are printed proportionally.

  • Horizontal transfers (wider than longer) will be max width (first number)
  • Vertical transfers (longer then wider) will be max length (second number)

Adult Sizing

Brand Transfer Size
Up to a 2″ x 2″ area

Pocket Transfer Size
Up to a 3″ x 3″ area

Hat Transfer Size
Up to a 3″ x 5″ area

Chest Transfer Size
Up to a 4″ x 4″ area

Adult XS-M Transfer Size
Up to a 10″ x 14″ area

Adult L-XL Transfer Size
Up to a 11″ x 14″ area

Adult 2XL+ Transfer Size
Up to a 12″ x 15″ area

Youth Sizing

Youth Chest Transfer Size
Up to a 2″ x 2″ area

YXS-YM Transfer Size
Up to a 3″ x 5″ area

YL-YXL Transfer Size
Up to a 4″ x 4″ area

Infant & Toddler Sizing

Infant Transfer Size
Up to a 2″ x 2″ area

Toddler Transfer Size
Up to a 3″ x 3″ area

Just Waiting For Halloween Skeleton with Swirling Bats Gradient DTF Transfer

Meet Benny the Skeleton – the most patient Halloween enthusiast you’ll ever encounter! While other spooky characters are busy perfecting their scares year-round, Benny has mastered the art of the ultimate Halloween countdown. Picture this: it’s February, and while everyone else is focused on Valentine’s Day, Benny is already sitting by his favorite haunted pond, watching the bats swirl overhead, dreaming of October 31st.

This adorable skeletal friend has been caught in his natural habitat – a mystical swirling vortex of anticipation! The beautiful gradient design captures Benny’s mood perfectly, shifting from dreamy purples to ocean blues to sunny yellows, representing his emotional journey from “Is it Halloween yet?” to “Almost there!” to “Finally, it’s time!”

Product Features:
• Ready-to-press DTF (Direct to Film) transfer
• Vibrant gradient colors: purple, blue, teal, and yellow ombre effect
• Detailed vintage-style engraving artwork
• Includes whimsical bats and swirling wind elements
• Professional heat transfer quality
• Easy application instructions included

Perfect For:
• Halloween countdown apparel
• Spooky season enthusiasts
• Vintage horror aesthetic lovers
• Anyone who relates to waiting impatiently for their favorite holiday

Transform any garment into a statement piece with this charming “Just Waiting For Halloween” design. Benny’s patient vigil reminds us all that good things (like candy and costumes) come to those who wait!

Physical DTF transfer ready for heat press application – design will arrive at your selected size

Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F

-Polyester, Lycra, Spandex, etc.:
275° F

Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle

-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure

-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level

First Press –

  • -Position the shirt or fabric onto the heat press with nothing on it.
  • -Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
  • -Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
  • -Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.

Second Press –

  • -Crease the DTF transfer to find the midpoint down the length of the transfer.
  • -Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
  • -Make sure the white glue part is down on the shirt and the design is visible from above
  • -Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
  • -Remove the top film, starting from the corner and pull across (not up) until the film is completely removed

NOTE- 

  • -The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
  • -Fine lines have less glue due to their design and may not fully stick until cooled
  • -For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
  • -Once you have removed the film, place the shirt back on the heat press for the final press

Third Press-

  • -Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
  • -Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.

Reviews

There are no reviews yet.

Be the first to review “Skeleton Waiting for Halloween – DTF Transfer”

Your email address will not be published. Required fields are marked *

SKU: N/A Categories: , , , , Tag: Brand:

Related products