Tacos and Margs – Festive Mexican Food and Margarita Typography Design
Get ready to spice up your wardrobe with this vibrant “Tacos and Margs” DTF transfer! This eye-catching design features bold green lettering with a fun script “And” connecting two of life’s greatest pleasures – tacos and margaritas. The design is adorned with charming illustrations including an acoustic guitar and refreshing cocktail glasses, all set against a sunny yellow background with decorative stars.
The Story Behind the Design:
Legend has it that Maria, a spirited restaurant owner in a small coastal town, couldn’t decide between naming her new taco joint “Tacos Forever” or “Margarita Paradise.” After three test margaritas (purely for research purposes), she had an epiphany – why choose when you can have both? Thus, the iconic phrase “Tacos and Margs” was born, becoming the unofficial motto for anyone who believes life’s too short for just one of these perfect pleasures.
Perfect For:
– Cinco de Mayo celebrations
– Taco Tuesday enthusiasts
– Margarita lovers
– Mexican restaurant staff uniforms
– Fun party apparel
– Gift for foodie friends
Ready to Press DTF Transfer Details:
โ High-quality direct-to-film transfer
โ Vibrant, long-lasting colors
โ Easy application with heat press
โ Professional finish that won’t crack or fade
โ Multiple size options available
Transform any garment into a fiesta-ready statement piece with this deliciously fun design that celebrates the perfect pairing of tacos and margaritas!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275ยฐ F โ 285ยฐ F
-Polyester, Lycra, Spandex, etc.:
275ยฐ F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy โ Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press โ
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press โ
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-ย
-The DTF adhesive does not full bond as well with canvas material because it has โlooserโ open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Tacos And Margs – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.