Transform Your Memories into Colorful Keepsakes with Autograph Collection DTF Transfers
Remember that magical moment when your favorite teacher made learning feel like an adventure? Or when your bestie turned an ordinary day into an unforgettable memory? Now you can capture those special connections with our vibrant Autograph Collection DTF transfers!
The Story Behind the Design:
Picture this: It’s the end of the school year, and everyone’s scrambling to collect autographs in their yearbooks. But Sarah had a better idea – why not create something that could be treasured forever? She designed these colorful autograph frames that turned simple signatures into works of art. Whether it’s “For Teacher” (because Mrs. Johnson deserves more than just an apple) or “For Bestie” (because friendship signatures should sparkle), these frames became the hit of graduation season!
What You’ll Receive:
✨ Ready-to-press DTF transfer featuring three autograph collection frames
✨ Vibrant rainbow lettering that pops on any fabric color
✨ One large “AUTOGRAPHS” frame and two smaller themed frames
✨ Professional-grade transfer material for long-lasting results
✨ Easy application – just heat press and you’re done!
Application Details:
Simply heat press onto your favorite shirt, tote bag, or fabric item. The bold, colorful design ensures signatures will stand out beautifully against the frame borders, creating a keepsake that’s as special as the memories it holds.
Turn ordinary autographs into extraordinary memories with this cheerful, ready-to-press DTF transfer!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Autographs Teacher Bestie Frames – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.