Transform your wardrobe with this adorable “Teacher Mode Off” DTF heat transfer that celebrates every educator’s favorite time of day – when the school bell rings and it’s time to switch gears!
The Story Behind the Design:
Meet Ms. Sunshine, the most dedicated teacher who lives and breathes lesson plans, colorful markers, and student success. But when 3 PM hits and that final bell chimes, she has a secret ritual – she mentally flips her “Teacher Mode” switch to OFF and transforms from classroom superhero to regular human who can finally enjoy her coffee while it’s still hot! This vibrant design captures that magical moment when teachers everywhere get to take off their educator cape and just be themselves.
Product Features:
✨ Ready-to-Press DTF Transfer – No weeding or cutting required
🎨 Eye-Catching Design – Bright turquoise stripes with cheerful yellow and pink lettering
😊 Cute Smiley Face Detail – The “O” in “MODE” features an adorable happy face
🍎 Teacher-Themed Elements – Complete with pencil, apple, flowers, and star accents
💖 High-Quality Print – Crisp, vibrant colors that won’t fade or crack
Application Instructions:
Simply place on your garment, press with heat press or household iron, and peel away the carrier sheet for professional results every time!
Celebrate the hardworking educators in your life with this fun and relatable design that perfectly captures the joy of clocking out after a day of shaping young minds!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Teacher Mode Off School Holiday – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.