Spooky Rainbow Ghost with Jack-o’-Lantern Halloween DTF Transfer
Meet Prism, the friendliest ghost in the haunted rainbow dimension! This adorable specter wasn’t always a colorful phantom – legend says Prism was once a regular ghost who accidentally flew through a magical rainbow during a particularly enthusiastic haunting session. Now blessed with vibrant tie-dye colors that shift from electric blues and teals to hot pinks and sunny yellows, Prism has become the most popular ghost at every Halloween party!
Our Prism ghost comes complete with their trusty jack-o’-lantern bucket, ready to collect treats (or maybe just compliments on their fabulous new look). With those classic oval eyes and flowing ethereal form, this ghost brings both spooky vibes and cheerful rainbow magic to any surface.
Perfect for:
– Halloween costumes and party wear
– Kids’ clothing and accessories
– Spooky season decorations
– Anyone who loves cute ghosts with a colorful twist
– Pride-themed Halloween celebrations
Ready-to-Press DTF Transfer Details:
✨ Vibrant rainbow gradient colors
✨ High-quality heat transfer material
✨ Easy application with heat press or household iron
✨ Durable, long-lasting design
✨ Professional DTF printing technology
Transform any fabric item into a hauntingly beautiful Halloween statement piece with Prism the Rainbow Ghost – because why should ghosts be limited to just white sheets when they can rock the entire color spectrum?
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Colorful Rainbow Ghost Halloween – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.