Dancing Rainbow Skeleton Trio - DTF Transfer Dancing Rainbow Skeleton Trio - DTF Transfer Price range: $3.00 through $6.00
Colorful Rainbow Ghost Halloween - DTF Transfer Colorful Rainbow Ghost Halloween - DTF Transfer Price range: $3.00 through $6.00

Skeleton Waiting For Halloween – DTF Transfer

Price range: $3.00 through $6.00

Earn up to 6 points.
Skeleton Waiting For Halloween - DTF Transfer
Skeleton Waiting For Halloween – DTF Transfer
$3.00 – $6.00Price range: $3.00 through $6.00
DTF Transfer Sizing

All transfers are printed proportionally.

  • Horizontal transfers (wider than longer) will be max width (first number)
  • Vertical transfers (longer then wider) will be max length (second number)

Adult Sizing

Brand Transfer Size
Up to a 2″ x 2″ area

Pocket Transfer Size
Up to a 3″ x 3″ area

Hat Transfer Size
Up to a 3″ x 5″ area

Chest Transfer Size
Up to a 4″ x 4″ area

Adult XS-M Transfer Size
Up to a 10″ x 14″ area

Adult L-XL Transfer Size
Up to a 11″ x 14″ area

Adult 2XL+ Transfer Size
Up to a 12″ x 15″ area

Youth Sizing

Youth Chest Transfer Size
Up to a 2″ x 2″ area

YXS-YM Transfer Size
Up to a 3″ x 5″ area

YL-YXL Transfer Size
Up to a 4″ x 4″ area

Infant & Toddler Sizing

Infant Transfer Size
Up to a 2″ x 2″ area

Toddler Transfer Size
Up to a 3″ x 3″ area

Spooky Skeleton Just Waiting for Halloween Rainbow Gradient Design

Get ready to add some bone-chilling charm to your Halloween wardrobe with this delightfully eerie skeleton design! This whimsical DTF transfer features a contemplative skeleton sitting peacefully in a swirling, dreamlike landscape, complete with flying bats and mesmerizing spiral skies in gorgeous rainbow gradient colors.

The Story Behind the Design:
Meet Bonnie, the most patient skeleton in all of Spooktown! While other skeletons are busy rattling chains and scaring trick-or-treaters, Bonnie has been sitting in the same mystical meadow since 1823, just waiting for Halloween to arrive. Legend says she’s so excited for the spookiest night of the year that she’s been counting down the days for over 200 years! The swirling rainbow sky above represents all her colorful Halloween dreams, while the bats serve as her daily calendar reminders.

Product Features:
• Ready-to-Press DTF Transfer – Professional quality direct-to-film printing
• Vibrant Rainbow Gradient Colors – Purple, blue, and green ombre effects that pop
• Detailed Vintage Illustration Style – Hand-drawn aesthetic with intricate line work
• Perfect Halloween Design – Ideal for October festivities and spooky season
• Durable & Long-Lasting – High-quality transfer material for repeated washing
• Easy Application – Simply press with heat press or household iron

Transform any garment into a conversation starter with this enchanting “Just Waiting for Halloween” skeleton design. Perfect for Halloween enthusiasts, vintage art lovers, and anyone who appreciates a good spooky story!

Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F

-Polyester, Lycra, Spandex, etc.:
275° F

Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle

-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure

-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level

First Press –

  • -Position the shirt or fabric onto the heat press with nothing on it.
  • -Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
  • -Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
  • -Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.

Second Press –

  • -Crease the DTF transfer to find the midpoint down the length of the transfer.
  • -Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
  • -Make sure the white glue part is down on the shirt and the design is visible from above
  • -Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
  • -Remove the top film, starting from the corner and pull across (not up) until the film is completely removed

NOTE- 

  • -The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
  • -Fine lines have less glue due to their design and may not fully stick until cooled
  • -For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
  • -Once you have removed the film, place the shirt back on the heat press for the final press

Third Press-

  • -Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
  • -Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.

Reviews

There are no reviews yet.

Be the first to review “Skeleton Waiting For Halloween – DTF Transfer”

Your email address will not be published. Required fields are marked *

SKU: N/A Categories: , , , , Tag: Brand:

Related products