Spooky Season Halloween Holographic Panels - DTF Transfer Spooky Season Halloween Holographic Panels - DTF Transfer Price range: $3.00 through $6.00
BOO Rainbow Leopard Halloween - DTF Transfer BOO Rainbow Leopard Halloween - DTF Transfer Price range: $3.00 through $6.00

Happy Halloween Spooky Ghosts – DTF Transfer

Price range: $3.00 through $6.00

Earn up to 6 points.
Happy Halloween Spooky Ghosts - DTF Transfer
Happy Halloween Spooky Ghosts – DTF Transfer
$3.00 – $6.00Price range: $3.00 through $6.00
DTF Transfer Sizing

All transfers are printed proportionally.

  • Horizontal transfers (wider than longer) will be max width (first number)
  • Vertical transfers (longer then wider) will be max length (second number)

Adult Sizing

Brand Transfer Size
Up to a 2″ x 2″ area

Pocket Transfer Size
Up to a 3″ x 3″ area

Hat Transfer Size
Up to a 3″ x 5″ area

Chest Transfer Size
Up to a 4″ x 4″ area

Adult XS-M Transfer Size
Up to a 10″ x 14″ area

Adult L-XL Transfer Size
Up to a 11″ x 14″ area

Adult 2XL+ Transfer Size
Up to a 12″ x 15″ area

Youth Sizing

Youth Chest Transfer Size
Up to a 2″ x 2″ area

YXS-YM Transfer Size
Up to a 3″ x 5″ area

YL-YXL Transfer Size
Up to a 4″ x 4″ area

Infant & Toddler Sizing

Infant Transfer Size
Up to a 2″ x 2″ area

Toddler Transfer Size
Up to a 3″ x 3″ area

Transform your Halloween wardrobe with this spine-tingling DTF transfer featuring ghostly spectral figures emerging from a haunted mansion scene. This ready-to-press design showcases an eerie vintage illustration style with gradient rainbow colors flowing from purple to blue to green to yellow.

The Haunting Tale Behind This Design:
Legend has it that the three ghostly figures in this design were once the mansion’s eccentric groundskeepers who got a little too excited about decorating for Halloween. They spent so much time perfecting their spooky display that they forgot to leave before midnight on Halloween night – and well, the rest is history! Now they float around the mansion grounds, still trying to wish everyone a “Happy Halloween” in their own ethereal way.

Key Features:
• Premium DTF (Direct to Film) heat transfer technology
• Vibrant gradient colors that pop on any fabric
• Detailed haunted mansion and ghostly figure artwork
• Easy heat press application – no weeding required
• Durable, washable finish that won’t crack or peel
• Perfect for creating custom Halloween apparel

Application Instructions:
Simply heat press at 300-320°F for 10-15 seconds with medium pressure. Peel when cool for best results.

Perfect For:
Halloween parties, trick-or-treating, spooky season celebrations, or anyone who wants to add some friendly phantom flair to their wardrobe. This design brings just the right amount of cute creepiness to make your Halloween ensemble absolutely boo-tiful!

Ready to let these friendly phantoms haunt your favorite garments? Order your size and get ready to press some Halloween magic!

Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F

-Polyester, Lycra, Spandex, etc.:
275° F

Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle

-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure

-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level

First Press –

  • -Position the shirt or fabric onto the heat press with nothing on it.
  • -Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
  • -Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
  • -Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.

Second Press –

  • -Crease the DTF transfer to find the midpoint down the length of the transfer.
  • -Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
  • -Make sure the white glue part is down on the shirt and the design is visible from above
  • -Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
  • -Remove the top film, starting from the corner and pull across (not up) until the film is completely removed

NOTE- 

  • -The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
  • -Fine lines have less glue due to their design and may not fully stick until cooled
  • -For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
  • -Once you have removed the film, place the shirt back on the heat press for the final press

Third Press-

  • -Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
  • -Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.

Reviews

There are no reviews yet.

Be the first to review “Happy Halloween Spooky Ghosts – DTF Transfer”

Your email address will not be published. Required fields are marked *

SKU: N/A Categories: , , , , Tag: Brand:

Related products