Love is in the Air – Try Not to Breathe Vintage Gas Mask Pin-Up Girl DTF Transfer
Meet Rosie, our fabulous 1950s pin-up sweetheart who took “breathtaking beauty” a little too literally! When romance got a bit too overwhelming at the local malt shop, our clever gal decided to invest in some protective gear. Now she’s serving looks AND staying safe from all those love-struck suitors blowing kisses her way!
This stunning black and white vintage-inspired design features our sassy heroine in her signature victory roll hairstyle and fitted dress, complete with her trusty gas mask and floating heart details. The bold typography “LOVE IS IN THE AIR – TRY NOT TO BREATHE” adds the perfect touch of cheeky humor to this conversation-starting design.
Product Features:
โข High-quality DTF (Direct to Film) heat transfer ready to press
โข Crisp black and white vintage pin-up artwork with detailed line work
โข Durable transfer material that bonds beautifully to cotton, polyester, and cotton blends
โข Easy application with heat press (instructions included)
โข Professional-grade inks ensure long-lasting, wash-resistant results
Perfect For:
– Vintage enthusiasts and pin-up style lovers
– Anyone with a quirky sense of humor
– Retro-themed events and parties
– Statement pieces that spark conversation
– Gift for that friend who appreciates dark comedy and vintage aesthetics
Transform any garment into a unique conversation piece with this delightfully twisted take on romance and vintage glamour. Rosie’s got style, sass, and the perfect solution for when love gets a little too intense!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275ยฐ F โ 285ยฐ F
-Polyester, Lycra, Spandex, etc.:
275ยฐ F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy โ Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press โ
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press โ
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-ย
-The DTF adhesive does not full bond as well with canvas material because it has โlooserโ open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Love Is In The Air Try Not To Breathe Black – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.