Vintage Pin-Up Woman Gas Mask Love Is In The Air Try Not To Breathe DTF Transfer
Meet Rosie, the world’s most romantically prepared gal from the 1950s! While other ladies were worried about smudging their lipstick on dinner dates, clever Rosie had a different approach to love. Armed with her trusty gas mask and an endless supply of sass, she figured out the secret to lasting romance: when love is literally in the air, sometimes you’ve got to protect yourself from breathing it all in too quickly!
This charmingly ironic vintage-inspired design features a classic pin-up style woman sporting a gas mask while surrounded by floating hearts. The bold red vintage illustration captures that perfect blend of wartime practicality and romantic whimsy that made the 1940s and 50s so memorable.
Product Features:
– High-quality DTF (Direct to Film) heat transfer
– Vibrant red vintage-style artwork on clear background
– Ready to press application – no weeding required
– Durable, professional-grade transfer material
– Perfect for cotton, cotton blends, and polyester fabrics
Application Instructions:
– Preheat press to 280-300ยฐF
– Press for 10-15 seconds with medium pressure
– Peel carrier sheet while warm
– Press again for 5 seconds to ensure durability
Transform any garment into a conversation starter with this delightfully quirky vintage design that proves sometimes the best defense against love is a good offense – and maybe a gas mask!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275ยฐ F โ 285ยฐ F
-Polyester, Lycra, Spandex, etc.:
275ยฐ F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy โ Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press โ
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press โ
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-ย
-The DTF adhesive does not full bond as well with canvas material because it has โlooserโ open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Love Is In The Air Try Not To Breathe Red – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.