Rainbow Gradient Ghost with Halloween Bow and Jack-o’-Lantern Trick-or-Treat Bag
Transform any garment into a spooktacular statement with this adorable rainbow ghost DTF transfer! This charming specter isn’t your typical scary spirit – she’s dressed to impress for Halloween night in her vibrant gradient glory.
The Story Behind This Boo-tiful Design:
Meet Prisma, the friendliest ghost in the neighborhood! Unlike her monochrome cousins who stick to traditional white sheets, Prisma discovered a magical rainbow potion in an old witch’s cauldron. One accidental tumble later, and she became the most colorful ghost in the afterlife! Now she floats from house to house with her trusty jack-o’-lantern candy bag, spreading joy and collecting treats. Her signature pink bow shows she’s always ready for a ghostly good time!
Premium DTF Transfer Features:
✨ Vibrant rainbow gradient colors that pop on any fabric
✨ Crisp, detailed artwork with adorable Halloween elements
✨ Soft-hand feel that won’t crack or peel
✨ Easy application with heat press or household iron
✨ Perfect for shirts, hoodies, bags, and more
✨ Long-lasting durability through multiple washes
Ready to Press & Ship:
This high-quality DTF transfer comes ready to apply to your favorite garments. Simply peel, press, and enjoy your new spook-tacular design! Perfect for Halloween parties, fall festivals, or anyone who loves cute ghostly characters with a colorful twist.
Create magical memories with this enchanting rainbow ghost – because even spirits deserve to shine bright!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Rainbow Ghost Halloween Costume – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.