Transform your Halloween wardrobe with this enchanting trio of spooky spirits! This vibrant DTF transfer features three adorable ghosts in a stunning gradient of purple, blue, and green hues, set against a whimsically haunted graveyard scene complete with jack-o’-lanterns and twisted trees.
The Story Behind the Design:
Meet the Phantom Rainbow Squad – Violet, Azure, and Sage! Legend has it these three best ghost friends got tired of the same old white sheet routine and decided to crash a tie-dye party in the living world. Now they haunt the local art supply store, leaving trails of colorful ectoplasm wherever they float. Their mission? To prove that being spooky doesn’t mean you can’t be stylish!
Product Features:
• High-quality DTF (Direct to Film) heat transfer
• Vibrant, fade-resistant colors with smooth gradient effects
• Professional-grade adhesion for long-lasting wear
• Compatible with cotton, polyester, and cotton blends
• Easy application with heat press or household iron
• Detailed artwork with crisp lines and spooky atmosphere
Perfect For:
– Halloween party outfits
– Spooky season apparel
– Kids’ Halloween costumes
– Ghost-themed merchandise
– October festival gear
Ready to press and ship! Simply select your desired size and get ready to add some colorful supernatural charm to your favorite garments. These friendly phantoms are dying to haunt your wardrobe!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Halloween Spooky Gradient Ghosts – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.