Transform your Halloween wardrobe with our vibrant “Spooky Season” DTF transfer featuring four enchanting scenes that capture the magic of autumn’s most bewitching time of year!
The Story Behind the Design:
Legend has it that these four mystical panels were discovered in an old witch’s spellbook, each one representing a different chapter of the spooky season saga. The jack-o’-lantern guards the entrance to October with his rainbow-bright grin, while the weathered tombstone holds secrets of Halloween nights past. The haunted castle stands proud against a galaxy of purple stars, hosting ghostly tea parties every midnight, and our friendly sheet ghost floats through flower fields, spreading giggles instead of scares!
What You’ll Receive:
– High-quality DTF (Direct to Film) heat transfer
– Ready to press – no weeding required
– Vibrant, fade-resistant colors with excellent wash durability
– Professional-grade transfer film for crisp, detailed application
Perfect For:
– Halloween party outfits
– Autumn festival apparel
– Spooky season enthusiasts
– Anyone who loves colorful, whimsical Halloween vibes
Application Instructions:
Simply position, press with heat press or iron, and peel when cool. Works beautifully on cotton, cotton blends, and polyester fabrics.
Bring some magical mischief to your wardrobe with this delightfully spooky design that’s equal parts Halloween spirit and rainbow magic!
Temperature-
-Cotton, Cotton Blends, & Canvas:
275° F – 285° F
-Polyester, Lycra, Spandex, etc.:
275° F
Pressure-
-Heat Press with a Knob and Output Measurement:
Medium Heavy – Heavy Pressure
-It should be moderately hard but not impossible to pull down the lever with one hand. Turn the pressure knob to lower the top heat plate until you feel resistance when lowering the handle
-Heat Press with PSI (pounds per square inch) Output Measurement:
170 lbs of Pressure
-Commercial Heat Press with 1-10 Pressure Level Output:
7-8 Level
First Press –
-Position the shirt or fabric onto the heat press with nothing on it.
-Make sure any collars, seams, buttons, etc. are off the heat press. If this is not possible, use a heat press pad or pillow to elevate the area you will be pressing up so you get even pressure
-Lint roll the shirt (if needed) to get anything lint or fuzz off the garment where you will be pressing
-Press the shirt for 3-5 seconds to get any wrinkles or humidity out of the shirt.
Second Press –
-Crease the DTF transfer to find the midpoint down the length of the transfer.
-Position the DTF transfer correctly onto the shirt. We recommend using a t-shirt guide or laser system to get proper alignment.
-Make sure the white glue part is down on the shirt and the design is visible from above
-Press the shirt for 10 seconds (8 seconds for polyester or delicate fabrics).
-Remove the top film, starting from the corner and pull across (not up) until the film is completely removed
NOTE-
-The DTF adhesive does not full bond as well with canvas material because it has “looser” open areas which do not imbed as well until cooled
-Fine lines have less glue due to their design and may not fully stick until cooled
-For these situations, we recommend waiting to cold peel, even though this is a instant peel film.
-Once you have removed the film, place the shirt back on the heat press for the final press
Third Press-
-Place a finishing sheet on top of your design. This can be a sheet of teflon, canvas, etc. that protects and helps embed your design and make the design feel better on the shirt.
-Press for 5 more seconds then remove the finishing sheet and t-shirt from your press.
Reviews
There are no reviews yet.
Be the first to review “Spooky Season Halloween Bookmarks – DTF Transfer” Cancel reply
Reviews
There are no reviews yet.